Cost to Ship a Boat from Washington to Texas
About 1,790 road miles between the two states' centers. Washington oversize permits typically run $20–$90 and Texas's $30–$130. Enter your pickup and delivery points below for an exact route.
- Estimated Cost Range
- $3,897 – $6,584
- Mid-Point Estimate
- $4,872
- Turnkey Move Total (Est.)
- $4,793 – $7,480 (Includes Marina Lifts & Handling)
- Loaded Road Clearance
- 10 ft (10'0") — Legal under 13'6" interstate limit
- Pickup Handling Fee (Est.)
- $448 (Marina travelift haul-out)
- Delivery Handling Fee (Est.)
- $448 (Marina travelift splash)
- Rate Tier
- Mid-Size Boat (20–35 ft)
- All-in Cost per Mile
- $2.72/mile (includes loading fee)
- Base Transport Cost
- $3,400
- Fuel Surcharge (8%)
- $272
- Boat Type Adjustment
- Standard Powerboat
- Trailer Discount
- None (Haul-Away Carrier Trailer)
- Winter Season Note
- Off-peak rate applied (~10% below spring/summer)
- Weight Adjustment
- Standard
- Permit Fees
- $1,200 (8 states × $150)
- Pilot/Escort Car Fees
- None required
- Insurance Estimate
- Enter boat value to estimate
- Sailboat Mast Handling
- N/A
- Residential Crane Rental
- N/A
- Shrink Wrap Service
- Not Included
- Oversize Load
- ⚠ Yes — permits/clearance review required
- Season Adjustment
- Standard rates
- Transport Method
- Overland (truck + trailer)
Seasonal Estimate: Washington → Texas
How this estimate shifts month by month with typical seasonal demand. A planning model, not live carrier pricing.
Email Me This Quote
Get this estimate by email with a printable PDF, a live quote page you can adjust, and the checklist to vet any hauler before you book.
Washington to Texas: estimated costs
Typical boats over the roughly 1,790 road miles between the two states' centers. Your real pickup and delivery points set the true distance.
| Boat | Oct–Mar | Apr–Sep (peak) |
|---|---|---|
| 18 ft bass / fishing boat7.5 ft beam · no permits (legal width) | $1,130 – $2,426 | $1,244 – $2,669 |
| 24 ft center console8.5 ft beam · no permits (legal width) | $1,813 – $3,732 | $1,994 – $4,105 |
| 30 ft sailboat (mast down)10.5 ft beam · oversize permits | $5,369 – $8,956 | $5,741 – $9,686 |
| 40 ft cabin cruiser13.5 ft beam · oversize permits + escort car | $11,142 – $17,009 | $11,867 – $18,321 |
Based on about 1,790 road miles, with permits in 8 states for wide boats. Hauler freight only, marina to marina, boat on the carrier's trailer; marina lift and splash fees are extra. These come from our published formula, not carrier quotes. Enter your own boat in the calculator above for a tailored range.
WA and TX oversize rules
Only boats wider than 8 ft 6 in, or taller than 13 ft 6 in on the trailer, need permits.
- Washington permits ($20–$90 each)
- The Washington State Department of Transportation issues oversize permits, and boats bound for Alaska frequently move under permits coordinated with ferry or barge bookings out of Seattle and Bellingham.
- Texas permits ($30–$130 each)
- The Texas Department of Motor Vehicles issues oversize permits, and because the state is so large a single Texas crossing can cost as much in permit and escort time as two smaller states combined. Annual permits are common for carriers running the I-10 corridor.
- Travel restrictions in Washington
- Daylight movement is standard, and mountain-pass restrictions on I-90 at Snoqualmie and US-2 at Stevens Pass apply in winter. Puget Sound ferry routes have their own width and weight limits that can rule out an oversize load entirely. Escorts are generally required above roughly 12 ft of beam, and pass routes may add a second escort or require a route survey.
- Travel restrictions in Texas
- Daylight-only movement for wide loads, with restrictions through Houston, Dallas–Fort Worth, San Antonio and Austin during peak hours. Summer heat advisories occasionally affect scheduling for long hauls. Escorts are generally required above roughly 12 ft of beam, and Texas often requires them for long loads as well as wide ones.
The corridor
- States in between
- A direct line crosses Washington, Oregon, Idaho, Utah, Wyoming, Colorado, New Mexico and Texas. Wide boats need a permit in each state they travel through, and the hauler's highway route can differ.
- Leaving Washington
- I-5 handles north-south traffic well, but every eastbound route crosses the Cascades. Snow, grade and reduced clearances make winter Cascade crossings the single most common reason a Washington boat haul gets delayed. Main ports: Port of Seattle, Port of Tacoma, Port of Bellingham, Port of Everett, Port of Anacortes.
- Arriving in Texas
- I-10, I-20, I-35 and I-45 give haulers wide, flat, high-clearance corridors, and Texas is generally one of the easiest states in the country to move an oversize boat through. The trade-off is sheer distance: crossing the state east to west is roughly 880 miles. Main ports: Port of Houston, Port of Corpus Christi, Port of Galveston, Port Freeport, Port of Brownsville.
- Best time to ship into Texas
- The season is long and demand is spread out, which keeps rates steadier than in the North. Hurricane season between June and November is the main scheduling risk on the coast.
- City-to-city routes on this corridor
- Seattle to Houston · Seattle to Galveston
Frequently asked questions
For about 1,790 road miles, a 24 ft center console runs roughly $1,813 – $3,732 off-peak (October–March) and $1,994 – $4,105 in the spring and summer peak, using our published formula. Wider boats add permits in every state crossed, and escorts once beam passes 12 ft.
One per state traveled, usually 8 or so on this corridor. Washington permits typically cost $20–$90 per single-trip oversize permit and Texas $30–$130 per single-trip oversize permit.
Go deeper
- Oversize permits & escortsWhen beam or height makes your boat a wide load, and what each state charges.
- Vetting a boat haulerCheck USDOT and MC authority and cargo insurance before you book.
- How long shipping takesPickup windows, daily driving limits, and what slows a haul down.
- Boat prep checklistWhat to remove, secure, and photograph before the truck arrives.
Rizwan Malik
Founder & Editor
- Calculator methodology
- Boat transport rate research
Rizwan Malik founded Boat Shipping Cost Calculator and edits every guide on it. He built the calculator's rate formula and keeps it current against published carrier and marketplace rates, FMCSA carrier records and state DOT permit rules.