Boat Shipping Calculator
Updated November 18, 20268 min read

Boat Transport Load Board: How to Read, Vet and Price a Boat Load

What a boat transport load board is, why boat loads differ from general freight, how to vet a posted load and price it per mile, and when to go direct.

A boat transport load board is an online listing where brokers, dealers and boat owners post boats that need hauling, and carriers bid on or claim them. Boat loads are not like general freight: they are often wide enough to need oversize permits, tall enough to worry about bridges, and frequently need a hydraulic boat trailer rather than a dry van or flatbed. Before you bid, confirm the boat's real length, beam, height and weight, whether it is on a trailer, and whether it is ready to load. Then price it per mile with your fixed loading time, permits, escorts, fuel and empty return miles built in.

Load boards are useful for filling a week or finding a load home. They are also where carriers most often lose money on boats, because a posting rarely tells the whole story. This guide is for owner-operators and small fleets who want to use them without getting burned.

What a load board is

In general trucking, a load board is a marketplace: shippers and freight brokers post loads with a pickup, a delivery, dates and sometimes a rate, and carriers search by lane and equipment type. For boats you will run into roughly three kinds of listing:

  • Freight and vehicle load boards. Built for brokers and carriers. Boats show up alongside cars, equipment and general freight, usually posted by a broker.
  • Consumer shipping marketplaces. An owner, seller or buyer posts a boat and several carriers send offers. You deal with a private person, often a first-time shipper.
  • Broker and dealer networks. Some brokers and dealers send loads to a private list of carriers they trust, by email, text or their own system.

In all three, the listing is only a starting point. The details that decide whether a boat load makes money are often missing.

How boat loads differ from general freight

Size and permits

Standard trailer width is capped at 102 inches, or 8 feet 6 inches. Any boat with a wider beam is an oversize load that needs a permit in every state on the route. Our oversize permits and escorts guide puts those at roughly $50 to $250 per state, with height above about 13.5 feet (14 feet in some Western states) getting the same treatment. A beam over roughly 12 feet usually brings a pilot car, and some states, including Florida, Colorado and West Virginia per that guide, restrict oversize moves on weekends. A general-freight load almost never carries these costs; many boat loads do.

Equipment

A boat without a trailer needs a hydraulic boat trailer, or a step-deck or lowboy with a cradle, not a standard flatbed. A boat on its own road-legal trailer is a tow-away job, where the customer's trailer condition becomes your problem on the road. The listing's "trailer: yes/no" field is one of the most important on the page, and one of the most often wrong.

Loading time and readiness

Loading, strapping and checking a boat can take three to five hours before the truck rolls, according to our overland price-per-mile breakdown. If the boat is still in the water, the yard has to haul it first. If the mast, tower or radar arch has to come down, someone has to do it. Every one of those can turn a scheduled pickup into a wasted day.

Value and liability

Boats are expensive single pieces of cargo. Our boat transport insurance guide lists carrier cargo insurance limits as commonly $100,000 to $500,000, with $100,000 as the federal baseline for general freight. A posted cruiser worth more than your cargo limit is a risk you should see before you bid, not after.

How to evaluate a posted boat load

Work through these before you call or bid.

1. The boat itself. Make and model, length overall, beam, height on the trailer and dry weight. If the listing only says "28 ft cruiser," ask. Owners often give advertised length, which can leave out platforms, pulpits and outboards. Run the numbers you get through the boat transport size and permit checker.

2. Trailer status. Is the boat on its own trailer? If so, ask about tires, bearings, lights, brakes and registration. If not, it needs your trailer, and you need to know how it is supported now: on a trailer, on stands at a yard, or in a cradle.

3. Pickup readiness. Is it out of the water? Who books and pays for the yard lift? Is the site reachable with your rig? Is loose gear removed and canvas secured?

4. Dates. Earliest pickup, latest delivery, and whether either is fixed. Oversize permits are route-specific and usually valid for five to ten days, so you cannot file until dates are firm.

5. Route. Count the states on the route, not just the miles: permit costs are per state. Check for low clearances on tall loads, and where the delivery leaves you for your next load.

6. Who posted it. A broker, a dealer, or the owner? With a broker, find out whether the posted rate is what you will be paid, when, and who signs the bill of lading at each end. With an owner, confirm you are talking to the person who can release the boat.

7. Red flags. A rate far below what the math says, "beam unknown," "trailer status unknown," a pickup date that is "ASAP" with a boat still in the water, or a poster who will not give you a pickup contact until after you commit.

How to price a boat load per mile

Most boat hauling is quoted per mile with fixed costs added. The overland price-per-mile article explains why short runs cost more per mile than long ones: the loading labor is the same whether you drive 100 miles or 2,000. Its formula looks like this:

Effective rate = Base linehaul + (Fixed prep ÷ Miles)

150-mile move: $1.15 + ($225 ÷ 150) = $2.65 per mile 1,500-mile move: $1.15 + ($225 ÷ 1,500) = $1.30 per mile

Build your own number up from the same parts:

  • Linehaul. For legal-width boats (under 8 feet 6 inches of beam) on multi-state routes, the article reports real marketplace bookings between roughly $0.75 and $2.00 per mile, with about $1.35 typical. Treat that as a reality check on posted rates, not as your cost floor.
  • Fixed loading time. Spread it across the miles, as in the formula. It is why a short local boat move at a "long-haul" rate rarely pays.
  • Oversize. For boats from 8 feet 7 inches to 10 feet of beam, the article estimates roughly 20 to 30% over the legal-width rate, plus permits at $50 to $250 per state. Add pilot cars where needed; the permits guide puts them at about $1.50 per mile.
  • Fuel. A truck towing a boat averages 5.5 to 8.0 miles per gallon in the article's figures, so diesel near $4.10 a gallon is about $0.55 to $0.75 per mile in fuel alone. If you use a fuel surcharge, say so in the quote.
  • Deadhead. Add the empty miles to the pickup and home from a remote delivery. Deadhead miles are the reason a load to an inland lake can be worth less than its rate suggests, and a good backhaul is worth more.
  • Accessorials. Waiting time, extra labor for tight access, or a second trip if the boat is not ready. Agree on these up front; see accessorial fees.

If the posted rate does not cover your number, counter or pass. A boat load that loses money is not made better by keeping the truck moving.

Broker loads vs. going direct

A load board puts you in front of a lot of work quickly, but much of it comes through a broker. Our article on brokers vs. owner-operator carriers gives a simple example: the broker charges the owner $3,000, pays the driver $2,500, and keeps $500.

Broker load from a boardDirect customer
Finding the workFast; the broker has done the sellingSlow; you build relationships or market yourself
RateBroker's margin comes out of the loadYou keep the full rate
Boat detailsSecondhand, often incompleteStraight from the owner, dealer or yard
CommunicationThrough the brokerDirectly with the customer
PaymentOn the broker's termsOn your terms
Repeat workDepends on the brokerCustomer can call you again

Most small carriers use both: board and broker loads to fill gaps and backhauls, and direct work from marinas, dealers, yacht brokers and repeat customers for the better-paying core of the business. Our guide to boat transport leads for carriers covers those direct sources, and how to find boat transport jobs covers the authority, insurance and equipment you need first.

Joining the carrier network on this site

This site is not a load board. Boat owners use it to estimate transport costs, and we are building a way to connect them directly with licensed haulers. Today, carrier signup is free during early access and needs no card: you enter your company name, USDOT number (MC number optional), dispatch phone, equipment types and coverage states, and we check your USDOT number and operating authority on FMCSA SAFER before approving the account. Your dashboard shows your review status. The lead feed is not open yet, so no owner quote requests go to carriers today; approved carriers will see requests in their coverage states once it opens. More on the carrier page.

Ready to run the numbers?

Get your result instantly — private, in your browser.

Open the calculator →