Cost to Ship a Boat from South Carolina to Maryland
About 509 road miles between the two states' centers. South Carolina oversize permits typically run $25–$100 and Maryland's $30–$120. Enter your pickup and delivery points below for an exact route.
- Estimated Cost Range
- $1,797 – $2,561
- Mid-Point Estimate
- $2,074
- Turnkey Move Total (Est.)
- $2,693 – $3,457 (Includes Marina Lifts & Handling)
- Loaded Road Clearance
- 10 ft (10'0") — Legal under 13'6" interstate limit
- Pickup Handling Fee (Est.)
- $448 (Marina travelift haul-out)
- Delivery Handling Fee (Est.)
- $448 (Marina travelift splash)
- Rate Tier
- Mid-Size Boat (20–35 ft)
- All-in Cost per Mile
- $4.08/mile (includes loading fee)
- Base Transport Cost
- $1,365
- Fuel Surcharge (8%)
- $109
- Boat Type Adjustment
- Standard Powerboat
- Trailer Discount
- None (Haul-Away Carrier Trailer)
- Winter Season Note
- Off-peak rate applied (~10% below spring/summer)
- Weight Adjustment
- Standard
- Permit Fees
- $600 (4 states × $150)
- Pilot/Escort Car Fees
- None required
- Insurance Estimate
- Enter boat value to estimate
- Sailboat Mast Handling
- N/A
- Residential Crane Rental
- N/A
- Shrink Wrap Service
- Not Included
- Oversize Load
- ⚠ Yes — permits/clearance review required
- Season Adjustment
- Standard rates
- Transport Method
- Overland (truck + trailer)
Seasonal Estimate: South Carolina → Maryland
How this estimate shifts month by month with typical seasonal demand. A planning model, not live carrier pricing.
Email Me This Quote
Get this estimate by email with a printable PDF, a live quote page you can adjust, and the checklist to vet any hauler before you book.
South Carolina to Maryland: estimated costs
Typical boats over the roughly 509 road miles between the two states' centers. Your real pickup and delivery points set the true distance.
| Boat | Oct–Mar | Apr–Sep (peak) |
|---|---|---|
| 18 ft bass / fishing boat7.5 ft beam · no permits (legal width) | $407 – $776 | $448 – $853 |
| 24 ft center console8.5 ft beam · no permits (legal width) | $741 – $1,287 | $815 – $1,416 |
| 30 ft sailboat (mast down)10.5 ft beam · oversize permits | $2,767 – $3,787 | $2,939 – $4,060 |
| 40 ft cabin cruiser13.5 ft beam · oversize permits + escort car | $5,344 – $7,012 | $5,742 – $7,577 |
Based on about 509 road miles, with permits in 4 states for wide boats. Hauler freight only, marina to marina, boat on the carrier's trailer; marina lift and splash fees are extra. These come from our published formula, not carrier quotes. Enter your own boat in the calculator above for a tailored range.
SC and MD oversize rules
Only boats wider than 8 ft 6 in, or taller than 13 ft 6 in on the trailer, need permits.
- South Carolina permits ($25–$100 each)
- SCDOT issues oversize permits with a well-worn process for the I-95 boat corridor. Charleston harbor access is good, and permits for port-bound loads are routine.
- Maryland permits ($30–$120 each)
- Maryland oversize permits come through the State Highway Administration, and separate authority applies to the Bay Bridge and the Baltimore harbor tunnels. Tall loads are routinely barred from the tunnels and must be routed over the bridge instead.
- Travel restrictions in South Carolina
- Daylight-only movement, Charleston and Columbia peak-hour restrictions, and hurricane-season contingency on coastal routes. Escorts are generally required above roughly 12 ft of beam.
- Travel restrictions in Maryland
- Daylight-only movement, with Baltimore and Washington beltway restrictions during commute hours and heavy summer weekend limits on US-50 toward the Eastern Shore. Escorts are typically required above roughly 12 ft of beam; Bay Bridge crossings can trigger additional escort and timing requirements.
The corridor
- States in between
- A direct line crosses South Carolina, North Carolina, Virginia and Maryland. Wide boats need a permit in each state they travel through, and the hauler's highway route can differ.
- Leaving South Carolina
- I-95, I-26 and I-20 provide clean corridors, and the coastal plain is flat with generous clearances. Charleston peninsula access is the one place where narrow streets and bridge geometry require local knowledge. Main ports: Port of Charleston, Port of Georgetown.
- Arriving in Maryland
- I-95 and I-70 are straightforward, but Chesapeake geography forces long detours: a delivery from the Western Shore to the Eastern Shore may be twenty miles across the water and well over a hundred by road. Main ports: Port of Baltimore, Port of Salisbury.
- Best time to ship into Maryland
- A moderate season with a distinct rhythm around the Annapolis boat shows in October, which pulls transport demand into a tight autumn window as boats arrive for display and leave immediately afterward.
- City-to-city routes on this corridor
- Charleston to Annapolis
Frequently asked questions
For about 509 road miles, a 24 ft center console runs roughly $741 – $1,287 off-peak (October–March) and $815 – $1,416 in the spring and summer peak, using our published formula. Wider boats add permits in every state crossed, and escorts once beam passes 12 ft.
One per state traveled, usually 4 or so on this corridor. South Carolina permits typically cost $25–$100 per single-trip oversize permit and Maryland $30–$120 per single-trip oversize permit.
Go deeper
- Oversize permits & escortsWhen beam or height makes your boat a wide load, and what each state charges.
- Vetting a boat haulerCheck USDOT and MC authority and cargo insurance before you book.
- How long shipping takesPickup windows, daily driving limits, and what slows a haul down.
- Boat prep checklistWhat to remove, secure, and photograph before the truck arrives.
Rizwan Malik
Founder & Editor
- Calculator methodology
- Boat transport rate research
Rizwan Malik founded Boat Shipping Cost Calculator and edits every guide on it. He built the calculator's rate formula and keeps it current against published carrier and marketplace rates, FMCSA carrier records and state DOT permit rules.