Cost to Ship a Boat from Texas to Wisconsin
About 1,177 road miles between the two states' centers. Texas oversize permits typically run $30–$130 and Wisconsin's $20–$95. Enter your pickup and delivery points below for an exact route.
- Estimated Cost Range
- $3,030 – $4,796
- Mid-Point Estimate
- $3,670
- Turnkey Move Total (Est.)
- $3,926 – $5,692 (Includes Marina Lifts & Handling)
- Loaded Road Clearance
- 10 ft (10'0") — Legal under 13'6" interstate limit
- Pickup Handling Fee (Est.)
- $448 (Marina travelift haul-out)
- Delivery Handling Fee (Est.)
- $448 (Marina travelift splash)
- Rate Tier
- Mid-Size Boat (20–35 ft)
- All-in Cost per Mile
- $3.12/mile (includes loading fee)
- Base Transport Cost
- $2,426
- Fuel Surcharge (8%)
- $194
- Boat Type Adjustment
- Standard Powerboat
- Trailer Discount
- None (Haul-Away Carrier Trailer)
- Winter Season Note
- Off-peak rate applied (~10% below spring/summer)
- Weight Adjustment
- Standard
- Permit Fees
- $1,050 (7 states × $150)
- Pilot/Escort Car Fees
- None required
- Insurance Estimate
- Enter boat value to estimate
- Sailboat Mast Handling
- N/A
- Residential Crane Rental
- N/A
- Shrink Wrap Service
- Not Included
- Oversize Load
- ⚠ Yes — permits/clearance review required
- Season Adjustment
- Standard rates
- Transport Method
- Overland (truck + trailer)
Seasonal Estimate: Texas → Wisconsin
How this estimate shifts month by month with typical seasonal demand. A planning model, not live carrier pricing.
Email Me This Quote
Get this estimate by email with a printable PDF, a live quote page you can adjust, and the checklist to vet any hauler before you book.
Texas to Wisconsin: estimated costs
Typical boats over the roughly 1,177 road miles between the two states' centers. Your real pickup and delivery points set the true distance.
| Boat | Oct–Mar | Apr–Sep (peak) |
|---|---|---|
| 18 ft bass / fishing boat7.5 ft beam · no permits (legal width) | $784 – $1,636 | $863 – $1,800 |
| 24 ft center console8.5 ft beam · no permits (legal width) | $1,300 – $2,562 | $1,430 – $2,818 |
| 30 ft sailboat (mast down)10.5 ft beam · oversize permits | $4,261 – $6,619 | $4,537 – $7,131 |
| 40 ft cabin cruiser13.5 ft beam · oversize permits + escort car | $8,504 – $12,362 | $9,073 – $13,317 |
Based on about 1,177 road miles, with permits in 7 states for wide boats. Hauler freight only, marina to marina, boat on the carrier's trailer; marina lift and splash fees are extra. These come from our published formula, not carrier quotes. Enter your own boat in the calculator above for a tailored range.
TX and WI oversize rules
Only boats wider than 8 ft 6 in, or taller than 13 ft 6 in on the trailer, need permits.
- Texas permits ($30–$130 each)
- The Texas Department of Motor Vehicles issues oversize permits, and because the state is so large a single Texas crossing can cost as much in permit and escort time as two smaller states combined. Annual permits are common for carriers running the I-10 corridor.
- Wisconsin permits ($20–$95 each)
- WisDOT handles oversize permitting with straightforward single-trip and annual options. Spring thaw restrictions apply to some routes, and Milwaukee and Madison have local considerations for wide loads.
- Travel restrictions in Texas
- Daylight-only movement for wide loads, with restrictions through Houston, Dallas–Fort Worth, San Antonio and Austin during peak hours. Summer heat advisories occasionally affect scheduling for long hauls. Escorts are generally required above roughly 12 ft of beam, and Texas often requires them for long loads as well as wide ones.
- Travel restrictions in Wisconsin
- Daylight-only movement, metro rush-hour restrictions in Milwaukee and Madison, and winter weather delays from December through March. Escorts are generally required above roughly 12 ft of beam.
The corridor
- States in between
- A direct line crosses Texas, Oklahoma, Kansas, Missouri, Iowa, Illinois and Wisconsin. Wide boats need a permit in each state they travel through, and the hauler's highway route can differ.
- Leaving Texas
- I-10, I-20, I-35 and I-45 give haulers wide, flat, high-clearance corridors, and Texas is generally one of the easiest states in the country to move an oversize boat through. The trade-off is sheer distance: crossing the state east to west is roughly 880 miles. Main ports: Port of Houston, Port of Corpus Christi, Port of Galveston, Port Freeport, Port of Brownsville.
- Arriving in Wisconsin
- I-94, I-43 and I-41 are workable oversize corridors and terrain is easy. The Door Peninsula narrows to two-lane highway, which slows wide loads on the final leg. Main ports: Port Milwaukee, Port of Green Bay, Port of Superior.
- Best time to ship into Wisconsin
- Launch in late April and May, haul-out in September and October. Lake Michigan yards on the Door Peninsula fill their autumn schedules early because the destination market is so seasonal.
Frequently asked questions
For about 1,177 road miles, a 24 ft center console runs roughly $1,300 – $2,562 off-peak (October–March) and $1,430 – $2,818 in the spring and summer peak, using our published formula. Wider boats add permits in every state crossed, and escorts once beam passes 12 ft.
One per state traveled, usually 7 or so on this corridor. Texas permits typically cost $30–$130 per single-trip oversize permit and Wisconsin $20–$95 per single-trip oversize permit.
Go deeper
- Oversize permits & escortsWhen beam or height makes your boat a wide load, and what each state charges.
- Vetting a boat haulerCheck USDOT and MC authority and cargo insurance before you book.
- How long shipping takesPickup windows, daily driving limits, and what slows a haul down.
- Boat prep checklistWhat to remove, secure, and photograph before the truck arrives.
Rizwan Malik
Founder & Editor
- Calculator methodology
- Boat transport rate research
Rizwan Malik founded Boat Shipping Cost Calculator and edits every guide on it. He built the calculator's rate formula and keeps it current against published carrier and marketplace rates, FMCSA carrier records and state DOT permit rules.