Cost to Ship a Boat from Georgia to Virginia
About 506 road miles between the two states' centers. Georgia oversize permits typically run $30–$110 and Virginia's $30–$120. Enter your pickup and delivery points below for an exact route.
- Estimated Cost Range
- $1,794 – $2,553
- Mid-Point Estimate
- $2,069
- Turnkey Move Total (Est.)
- $2,690 – $3,449 (Includes Marina Lifts & Handling)
- Loaded Road Clearance
- 10 ft (10'0") — Legal under 13'6" interstate limit
- Pickup Handling Fee (Est.)
- $448 (Marina travelift haul-out)
- Delivery Handling Fee (Est.)
- $448 (Marina travelift splash)
- Rate Tier
- Mid-Size Boat (20–35 ft)
- All-in Cost per Mile
- $4.09/mile (includes loading fee)
- Base Transport Cost
- $1,360
- Fuel Surcharge (8%)
- $109
- Boat Type Adjustment
- Standard Powerboat
- Trailer Discount
- None (Haul-Away Carrier Trailer)
- Winter Season Note
- Off-peak rate applied (~10% below spring/summer)
- Weight Adjustment
- Standard
- Permit Fees
- $600 (4 states × $150)
- Pilot/Escort Car Fees
- None required
- Insurance Estimate
- Enter boat value to estimate
- Sailboat Mast Handling
- N/A
- Residential Crane Rental
- N/A
- Shrink Wrap Service
- Not Included
- Oversize Load
- ⚠ Yes — permits/clearance review required
- Season Adjustment
- Standard rates
- Transport Method
- Overland (truck + trailer)
Seasonal Estimate: Georgia → Virginia
How this estimate shifts month by month with typical seasonal demand. A planning model, not live carrier pricing.
Email Me This Quote
Get this estimate by email with a printable PDF, a live quote page you can adjust, and the checklist to vet any hauler before you book.
Georgia to Virginia: estimated costs
Typical boats over the roughly 506 road miles between the two states' centers. Your real pickup and delivery points set the true distance.
| Boat | Oct–Mar | Apr–Sep (peak) |
|---|---|---|
| 18 ft bass / fishing boat7.5 ft beam · no permits (legal width) | $405 – $772 | $446 – $849 |
| 24 ft center console8.5 ft beam · no permits (legal width) | $739 – $1,281 | $813 – $1,409 |
| 30 ft sailboat (mast down)10.5 ft beam · oversize permits | $2,762 – $3,776 | $2,933 – $4,049 |
| 40 ft cabin cruiser13.5 ft beam · oversize permits + escort car | $5,332 – $6,990 | $5,729 – $7,554 |
Based on about 506 road miles, with permits in 4 states for wide boats. Hauler freight only, marina to marina, boat on the carrier's trailer; marina lift and splash fees are extra. These come from our published formula, not carrier quotes. Enter your own boat in the calculator above for a tailored range.
GA and VA oversize rules
Only boats wider than 8 ft 6 in, or taller than 13 ft 6 in on the trailer, need permits.
- Georgia permits ($30–$110 each)
- GDOT issues oversize permits, and Georgia matters disproportionately because Brunswick is one of the busiest roll-on/roll-off ports in the United States. Boats bound for international RoRo shipping frequently truck to Brunswick regardless of where they started.
- Virginia permits ($30–$120 each)
- VDOT issues oversize permits, and the Hampton Roads area has extensive experience with marine loads because of the naval and commercial shipbuilding base. Tunnel restrictions around Norfolk are the main routing constraint.
- Travel restrictions in Georgia
- Daylight-only movement and firm restrictions through metro Atlanta, where the I-285 perimeter and downtown connector are effectively closed to wide loads during commute hours. Escorts are typically required above roughly 12 ft of beam, with Atlanta routing often demanding them sooner.
- Travel restrictions in Virginia
- Daylight-only movement, Northern Virginia and Hampton Roads peak-hour restrictions, and tunnel prohibitions that force tall loads onto specific bridge routes. Escorts are generally required above roughly 12 ft of beam; tunnel-avoidance routing may add escort mileage.
The corridor
- States in between
- A direct line crosses Georgia, South Carolina, North Carolina and Virginia. Wide boats need a permit in each state they travel through, and the hauler's highway route can differ.
- Leaving Georgia
- I-75, I-95, I-16 and I-20 are strong corridors, but metro Atlanta is a genuine chokepoint that carriers route around when possible, sometimes adding fifty or more miles to avoid it. Main ports: Port of Brunswick, Port of Savannah.
- Arriving in Virginia
- I-95, I-64 and I-81 are the workhorses. The Hampton Roads Bridge-Tunnel and Monitor–Merrimac tunnels exclude tall loads, so routing around them is standard practice and needs to be priced in. Main ports: Port of Virginia (Norfolk), Port of Richmond.
- Best time to ship into Virginia
- Moderate season with clear spring and autumn peaks. Virginia also absorbs snowbird traffic in both directions, which tightens capacity in April and October.
Frequently asked questions
For about 506 road miles, a 24 ft center console runs roughly $739 – $1,281 off-peak (October–March) and $813 – $1,409 in the spring and summer peak, using our published formula. Wider boats add permits in every state crossed, and escorts once beam passes 12 ft.
One per state traveled, usually 4 or so on this corridor. Georgia permits typically cost $30–$110 per single-trip oversize permit and Virginia $30–$120 per single-trip oversize permit.
Go deeper
- Oversize permits & escortsWhen beam or height makes your boat a wide load, and what each state charges.
- Vetting a boat haulerCheck USDOT and MC authority and cargo insurance before you book.
- How long shipping takesPickup windows, daily driving limits, and what slows a haul down.
- Boat prep checklistWhat to remove, secure, and photograph before the truck arrives.
Rizwan Malik
Founder & Editor
- Calculator methodology
- Boat transport rate research
Rizwan Malik founded Boat Shipping Cost Calculator and edits every guide on it. He built the calculator's rate formula and keeps it current against published carrier and marketplace rates, FMCSA carrier records and state DOT permit rules.