Cost to Ship a Boat from Florida to South Carolina
About 488 road miles between the two states' centers. Florida oversize permits typically run $30–$120 and South Carolina's $25–$100. Enter your pickup and delivery points below for an exact route.
- Estimated Cost Range
- $1,623 – $2,355
- Mid-Point Estimate
- $1,888
- Turnkey Move Total (Est.)
- $2,519 – $3,251 (Includes Marina Lifts & Handling)
- Loaded Road Clearance
- 10 ft (10'0") — Legal under 13'6" interstate limit
- Pickup Handling Fee (Est.)
- $448 (Marina travelift haul-out)
- Delivery Handling Fee (Est.)
- $448 (Marina travelift splash)
- Rate Tier
- Mid-Size Boat (20–35 ft)
- All-in Cost per Mile
- $3.87/mile (includes loading fee)
- Base Transport Cost
- $1,332
- Fuel Surcharge (8%)
- $107
- Boat Type Adjustment
- Standard Powerboat
- Trailer Discount
- None (Haul-Away Carrier Trailer)
- Winter Season Note
- Off-peak rate applied (~10% below spring/summer)
- Weight Adjustment
- Standard
- Permit Fees
- $450 (3 states × $150)
- Pilot/Escort Car Fees
- None required
- Insurance Estimate
- Enter boat value to estimate
- Sailboat Mast Handling
- N/A
- Residential Crane Rental
- N/A
- Shrink Wrap Service
- Not Included
- Oversize Load
- ⚠ Yes — permits/clearance review required
- Season Adjustment
- Standard rates
- Transport Method
- Overland (truck + trailer)
Seasonal Estimate: Florida → South Carolina
How this estimate shifts month by month with typical seasonal demand. A planning model, not live carrier pricing.
Email Me This Quote
Get this estimate by email with a printable PDF, a live quote page you can adjust, and the checklist to vet any hauler before you book.
Florida to South Carolina: estimated costs
Typical boats over the roughly 488 road miles between the two states' centers. Your real pickup and delivery points set the true distance.
| Boat | Oct–Mar | Apr–Sep (peak) |
|---|---|---|
| 18 ft bass / fishing boat7.5 ft beam · no permits (legal width) | $395 – $748 | $435 – $823 |
| 24 ft center console8.5 ft beam · no permits (legal width) | $724 – $1,247 | $796 – $1,372 |
| 30 ft sailboat (mast down)10.5 ft beam · oversize permits | $2,584 – $3,562 | $2,752 – $3,828 |
| 40 ft cabin cruiser13.5 ft beam · oversize permits + escort car | $5,109 – $6,708 | $5,502 – $7,261 |
Based on about 488 road miles, with permits in 3 states for wide boats. Hauler freight only, marina to marina, boat on the carrier's trailer; marina lift and splash fees are extra. These come from our published formula, not carrier quotes. Enter your own boat in the calculator above for a tailored range.
FL and SC oversize rules
Only boats wider than 8 ft 6 in, or taller than 13 ft 6 in on the trailer, need permits.
- Florida permits ($30–$120 each)
- Florida issues single-trip and annual blanket permits for loads wider than 8 ft 6 in through the Department of Transportation. Because so much of the state's freight is marine, most established boat haulers already hold Florida blanket authority, which is one reason quotes into and out of Florida are competitive relative to the rest of the country.
- South Carolina permits ($25–$100 each)
- SCDOT issues oversize permits with a well-worn process for the I-95 boat corridor. Charleston harbor access is good, and permits for port-bound loads are routine.
- Travel restrictions in Florida
- Oversize movement is generally limited to daylight hours, with additional restrictions on major holidays and through the Miami, Tampa and Orlando metro areas during peak commute windows. Hurricane-season road closures between June and November can also force reroutes. Escort vehicles are typically expected once beam passes roughly 12 ft, and route surveys become common above 14 ft.
- Travel restrictions in South Carolina
- Daylight-only movement, Charleston and Columbia peak-hour restrictions, and hurricane-season contingency on coastal routes. Escorts are generally required above roughly 12 ft of beam.
The corridor
- States in between
- A direct line crosses Florida, Georgia and South Carolina. Wide boats need a permit in each state they travel through, and the hauler's highway route can differ.
- Leaving Florida
- I-95, I-75 and I-10 give haulers flat, high-clearance corridors in every direction, and the state is unusually free of the low bridges and mountain grades that complicate northeastern and western routes. The main constraint is the peninsula itself: almost every long haul out of South Florida starts with 300–400 miles of driving before it reaches another state line. Main ports: Port Everglades, Port of Miami, Port Tampa Bay, JAXPORT (Jacksonville), Port Canaveral, Port Manatee.
- Arriving in South Carolina
- I-95, I-26 and I-20 provide clean corridors, and the coastal plain is flat with generous clearances. Charleston peninsula access is the one place where narrow streets and bridge geometry require local knowledge. Main ports: Port of Charleston, Port of Georgetown.
- Best time to ship into South Carolina
- Long season with a snowbird overlay. October to December inbound and March to May outbound are the busy windows, and Charleston Race Week pulls sailboat transport into a tight April slot.
- City-to-city routes on this corridor
- Miami to Charleston · Fort Lauderdale to Charleston · Tampa to Charleston
Frequently asked questions
For about 488 road miles, a 24 ft center console runs roughly $724 – $1,247 off-peak (October–March) and $796 – $1,372 in the spring and summer peak, using our published formula. Wider boats add permits in every state crossed, and escorts once beam passes 12 ft.
One per state traveled, usually 3 or so on this corridor. Florida permits typically cost $30–$120 per single-trip oversize permit and South Carolina $25–$100 per single-trip oversize permit.
Go deeper
- Oversize permits & escortsWhen beam or height makes your boat a wide load, and what each state charges.
- Vetting a boat haulerCheck USDOT and MC authority and cargo insurance before you book.
- How long shipping takesPickup windows, daily driving limits, and what slows a haul down.
- Boat prep checklistWhat to remove, secure, and photograph before the truck arrives.
Rizwan Malik
Founder & Editor
- Calculator methodology
- Boat transport rate research
Rizwan Malik founded Boat Shipping Cost Calculator and edits every guide on it. He built the calculator's rate formula and keeps it current against published carrier and marketplace rates, FMCSA carrier records and state DOT permit rules.