Cost to Ship a Boat from California to Georgia
About 2,427 road miles between the two states' centers. California oversize permits typically run $20–$100 and Georgia's $30–$110. Enter your pickup and delivery points below for an exact route.
- Estimated Cost Range
- $5,093 – $8,736
- Mid-Point Estimate
- $6,415
- Turnkey Move Total (Est.)
- $5,989 – $9,632 (Includes Marina Lifts & Handling)
- Loaded Road Clearance
- 10 ft (10'0") — Legal under 13'6" interstate limit
- Pickup Handling Fee (Est.)
- $448 (Marina travelift haul-out)
- Delivery Handling Fee (Est.)
- $448 (Marina travelift splash)
- Rate Tier
- Mid-Size Boat (20–35 ft)
- All-in Cost per Mile
- $2.64/mile (includes loading fee)
- Base Transport Cost
- $4,412
- Fuel Surcharge (8%)
- $353
- Boat Type Adjustment
- Standard Powerboat
- Trailer Discount
- None (Haul-Away Carrier Trailer)
- Winter Season Note
- Off-peak rate applied (~10% below spring/summer)
- Weight Adjustment
- Standard
- Permit Fees
- $1,650 (11 states × $150)
- Pilot/Escort Car Fees
- None required
- Insurance Estimate
- Enter boat value to estimate
- Sailboat Mast Handling
- N/A
- Residential Crane Rental
- N/A
- Shrink Wrap Service
- Not Included
- Oversize Load
- ⚠ Yes — permits/clearance review required
- Season Adjustment
- Standard rates
- Transport Method
- Overland (truck + trailer)
Seasonal Estimate: California → Georgia
How this estimate shifts month by month with typical seasonal demand. A planning model, not live carrier pricing.
Email Me This Quote
Get this estimate by email with a printable PDF, a live quote page you can adjust, and the checklist to vet any hauler before you book.
California to Georgia: estimated costs
Typical boats over the roughly 2,427 road miles between the two states' centers. Your real pickup and delivery points set the true distance.
| Boat | Oct–Mar | Apr–Sep (peak) |
|---|---|---|
| 18 ft bass / fishing boat7.5 ft beam · no permits (legal width) | $1,490 – $3,247 | $1,639 – $3,571 |
| 24 ft center console8.5 ft beam · no permits (legal width) | $2,346 – $4,948 | $2,580 – $5,443 |
| 30 ft sailboat (mast down)10.5 ft beam · oversize permits | $6,815 – $11,678 | $7,287 – $12,636 |
| 40 ft cabin cruiser13.5 ft beam · oversize permits + escort car | $14,176 – $22,131 | $15,065 – $23,815 |
Based on about 2,427 road miles, with permits in 11 states for wide boats. Hauler freight only, marina to marina, boat on the carrier's trailer; marina lift and splash fees are extra. These come from our published formula, not carrier quotes. Enter your own boat in the calculator above for a tailored range.
CA and GA oversize rules
Only boats wider than 8 ft 6 in, or taller than 13 ft 6 in on the trailer, need permits.
- California permits ($20–$100 each)
- Caltrans administers oversize permitting, and California is notably strict about equipment compliance and route adherence. Permits specify the exact approved route, and deviating from it can void coverage, so carriers build extra planning time into California quotes.
- Georgia permits ($30–$110 each)
- GDOT issues oversize permits, and Georgia matters disproportionately because Brunswick is one of the busiest roll-on/roll-off ports in the United States. Boats bound for international RoRo shipping frequently truck to Brunswick regardless of where they started.
- Travel restrictions in California
- Daylight-only movement is the norm for wide loads, with hard bans through the Los Angeles and Bay Area corridors during commute hours. Winter chain controls and seasonal closures in the Sierra Nevada can close I-80 and US-50 with little notice. Pilot cars are commonly required beyond roughly 12 ft of beam, and California enforces escort and signage requirements more aggressively than most states.
- Travel restrictions in Georgia
- Daylight-only movement and firm restrictions through metro Atlanta, where the I-285 perimeter and downtown connector are effectively closed to wide loads during commute hours. Escorts are typically required above roughly 12 ft of beam, with Atlanta routing often demanding them sooner.
The corridor
- States in between
- A direct line crosses California, Nevada, Arizona, Utah, New Mexico, Texas, Oklahoma, Arkansas, Mississippi, Alabama and Georgia. Wide boats need a permit in each state they travel through, and the hauler's highway route can differ.
- Leaving California
- I-5 and US-101 run the length of the state, but any eastbound haul has to clear either the Sierra Nevada or the southern desert route through I-40 or I-10. Mountain grades add fuel and time, and the Grapevine on I-5 is a known bottleneck for heavy loads. Main ports: Port of Los Angeles, Port of Long Beach, Port of Oakland, Port of San Diego, Port of Hueneme.
- Arriving in Georgia
- I-75, I-95, I-16 and I-20 are strong corridors, but metro Atlanta is a genuine chokepoint that carriers route around when possible, sometimes adding fifty or more miles to avoid it. Main ports: Port of Brunswick, Port of Savannah.
- Best time to ship into Georgia
- Long season, with the inland lake market concentrated March to October and the coast running year-round. Export bookings through Brunswick follow shipping schedules rather than weather.
Frequently asked questions
For about 2,427 road miles, a 24 ft center console runs roughly $2,346 – $4,948 off-peak (October–March) and $2,580 – $5,443 in the spring and summer peak, using our published formula. Wider boats add permits in every state crossed, and escorts once beam passes 12 ft.
One per state traveled, usually 11 or so on this corridor. California permits typically cost $20–$100 per single-trip oversize permit and Georgia $30–$110 per single-trip oversize permit.
Go deeper
- Oversize permits & escortsWhen beam or height makes your boat a wide load, and what each state charges.
- Vetting a boat haulerCheck USDOT and MC authority and cargo insurance before you book.
- How long shipping takesPickup windows, daily driving limits, and what slows a haul down.
- Boat prep checklistWhat to remove, secure, and photograph before the truck arrives.
Rizwan Malik
Founder & Editor
- Calculator methodology
- Boat transport rate research
Rizwan Malik founded Boat Shipping Cost Calculator and edits every guide on it. He built the calculator's rate formula and keeps it current against published carrier and marketplace rates, FMCSA carrier records and state DOT permit rules.