Boat Shipping Cost from Chicago to Galveston
About 1,110 road miles between Chicago, IL and Galveston, TX, through roughly 5 states. Enter your boat below for an estimate on this exact route.
- Estimated Cost Range
- $2,651 – $4,317
- Mid-Point Estimate
- $3,255
- Turnkey Move Total (Est.)
- $3,547 – $5,213 (Includes Marina Lifts & Handling)
- Loaded Road Clearance
- 10 ft (10'0") — Legal under 13'6" interstate limit
- Pickup Handling Fee (Est.)
- $448 (Marina travelift haul-out)
- Delivery Handling Fee (Est.)
- $448 (Marina travelift splash)
- Rate Tier
- Mid-Size Boat (20–35 ft)
- All-in Cost per Mile
- $2.93/mile (includes loading fee)
- Base Transport Cost
- $2,320
- Fuel Surcharge (8%)
- $186
- Boat Type Adjustment
- Standard Powerboat
- Trailer Discount
- None (Haul-Away Carrier Trailer)
- Winter Season Note
- Off-peak rate applied (~10% below spring/summer)
- Weight Adjustment
- Standard
- Permit Fees
- $750 (5 states × $150)
- Pilot/Escort Car Fees
- None required
- Insurance Estimate
- Enter boat value to estimate
- Sailboat Mast Handling
- N/A
- Residential Crane Rental
- N/A
- Shrink Wrap Service
- Not Included
- Oversize Load
- ⚠ Yes — permits/clearance review required
- Season Adjustment
- Standard rates
- Transport Method
- Overland (truck + trailer)
Seasonal Estimate: Chicago → Galveston
How this estimate shifts month by month with typical seasonal demand. A planning model, not live carrier pricing.
Email Me This Quote
Get this estimate by email with a printable PDF, a live quote page you can adjust, and the checklist to vet any hauler before you book.
Chicago to Galveston: estimated costs
What common boats cost to haul the roughly 1,110 road miles on this route, run through the same engine as the calculator above.
| Boat | Oct–Mar | Apr–Sep (peak) |
|---|---|---|
| 18 ft bass / fishing boat7.5 ft beam · no permits (legal width) | $747 – $1,550 | $821 – $1,705 |
| 24 ft center console8.5 ft beam · no permits (legal width) | $1,244 – $2,434 | $1,368 – $2,677 |
| 30 ft sailboat (mast down)10.5 ft beam · oversize permits | $3,856 – $6,080 | $4,122 – $6,568 |
| 40 ft cabin cruiser13.5 ft beam · oversize permits + escort car | $7,933 – $11,571 | $8,484 – $12,486 |
Based on about 1,110 road miles, with permits in 5 states for wide boats. Hauler freight only, marina to marina, boat on the carrier's trailer; marina lift and splash fees are extra. These come from our published formula, not carrier quotes. Enter your own boat in the calculator above for a tailored range.
What this route involves
- Distance
- 957 miles in a straight line, or about 1,110 miles by road. The calculator above replaces this with the actual driving route when you run it.
- States along the way
- The direct line crosses Illinois, Missouri, Arkansas, Louisiana and Texas. A boat wider than 8 ft 6 in needs an oversize permit in each state it travels through, and a hauler's highway route can add or swap a state or two.
- Permits leaving Illinois
- Illinois oversize permits are issued by IDOT, with separate authority required for Chicago city streets and for the tollway system. Loads routed through Cook County almost always need more planning than the mileage suggests. Typical cost: $25–$100 per single-trip oversize permit. Daylight-only movement, weekend and holiday limits, and strict Chicago-area rush-hour bans. Winter weather on I-80 and I-55 regularly delays oversize loads between December and March.
- Permits arriving in Texas
- The Texas Department of Motor Vehicles issues oversize permits, and because the state is so large a single Texas crossing can cost as much in permit and escort time as two smaller states combined. Annual permits are common for carriers running the I-10 corridor. Typical cost: $30–$130 per single-trip oversize permit. Daylight-only movement for wide loads, with restrictions through Houston, Dallas–Fort Worth, San Antonio and Austin during peak hours. Summer heat advisories occasionally affect scheduling for long hauls.
- Timing a delivery to Texas
- The season is long and demand is spread out, which keeps rates steadier than in the North. Hurricane season between June and November is the main scheduling risk on the coast.
- Nearest marina to Chicago
- Burnham Harbor in Chicago, IL, about 2 miles away.
- Nearest marina to Galveston
- Pier 21 Marina in Galveston, TX, about 1 miles away.
Frequently asked questions
Using our formula, a 24 ft center console on a carrier's trailer runs about $1,244 – $2,434 between October and March and $1,368 – $2,677 in the April–September peak. A 30 ft sailboat, which needs permits and mast handling, runs about $3,856 – $6,080 off-peak. Your boat's length, beam, and weight move the number, so enter them in the calculator for your own range.
Only if your boat is wider than 8 ft 6 in (or taller than 13 ft 6 in loaded). Then each state on the route needs its own permit. The direct line crosses about 5 states (Illinois, Missouri, Arkansas, Louisiana and Texas), and permits usually run $50–$250 each.
October through March. Demand peaks from April to September, and our estimates carry about a 10% peak premium: for a 24 ft center console on this route that's the difference between roughly $1,244 – $2,434 and $1,368 – $2,677.
Go deeper
- Oversize permits & escortsWhen beam or height makes your boat a wide load, and what each state charges.
- Vetting a boat haulerCheck USDOT and MC authority and cargo insurance before you book.
- How long shipping takesPickup windows, daily driving limits, and what slows a haul down.
- Boat prep checklistWhat to remove, secure, and photograph before the truck arrives.
Rizwan Malik
Founder & Editor
- Calculator methodology
- Boat transport rate research
Rizwan Malik founded Boat Shipping Cost Calculator and edits every guide on it. He built the calculator's rate formula and keeps it current against published carrier and marketplace rates, FMCSA carrier records and state DOT permit rules.