Boat Shipping Calculator

← Boat Shipping Glossary

Haul-Out

Lifting a boat out of the water, typically with a travel lift or crane, so it can be placed on a trailer or into storage ahead of transport.

How a haul-out works

The boat is driven or towed into a lift well, where a travel lift lowers slings under the hull at points marked by the yard. The lift raises the boat clear of the water and carries it to a trailer, a set of stands or a cradle. Smaller boats on their own trailers are usually pulled out at a ramp instead, which costs little or nothing.

Before the lift, the yard needs the boat's length, beam, weight and the position of any through-hull fittings or transducers, so the slings don't sit on them. Most yards also pressure-wash the bottom as soon as the boat is out.

What a haul-out costs

Most US marinas charge about $15 to $25 per foot of boat length for a travel-lift haul-out, so a 30 ft boat runs roughly $450 to $750. Pressure washing adds about $5 per foot, and blocking the boat on stands is often billed separately.

If the boat is being shipped, ask the yard whether it can load straight onto the carrier's trailer. That saves a second lift and a day or more of storage. The carrier's quote rarely includes the yard's charges, so budget for them on both ends: a haul-out at pickup and a launch (splash) at delivery.

Scheduling a haul-out for transport

Book the haul-out for the carrier's pickup day, not a week before, or you may pay for storage in between. In northern regions, autumn is the busy season for haul-outs because of winter storage, so book early or expect a wait.

Remove loose gear, drain water and fuel to the levels the carrier asks for, and lower or remove anything that adds height before the lift. That last step can decide whether the boat needs an oversize permit on the road.

Go further

Estimate your boat shipping cost with the free calculator.

More preparation terms

Shrink-wrap

A plastic cover tightly sealed over a boat to protect it from weather and debris during overland or sea transport.

Winterizing

Draining water systems and adding antifreeze to a boat's engine and plumbing before it travels through or sits in freezing temperatures, preventing cracked blocks and burst lines.

Mast Unstepping

Removing a sailboat's mast before transport, usually required for overland hauling and container shipping where height or container dimensions won't allow it to stay stepped.

Splash (Relaunch)

Lowering a boat back into the water at the end of a haul-out or transport, the counterpart to hauling out.

Commissioning

Reversing winterization and prep work after transport — reinstalling batteries, rigging the mast, and checking systems before a boat goes back in the water.

Go deeper